skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202936e ? skyworks proprietary information ? products and pro duct information are subject to ch ange without notice june 24 , 2015 1 data sheet SKYA21001: 20 mhz to 3.0 ghz spdt switch automotive applications ? infotainment ? automated toll systems ? garage door opener ? 802.11 b/g/n wlan, bluetooth ? systems ? wireless control systems ? outdoor lighting control ? remote keyless entry ? telematics ? gps/navigation features ? ip1db = +30 dbm typical @ 3 v ? ip3 = +43 dbm typical @ 3 v ? low insertion loss: 0.3 db @ 0.9 ghz ? low dc power consumption ? ultra-miniature, sc-70 (6-pin, 2.00 x 1.25 mm) package ? designed and manufactured in an iso/ts16949-certified facility ? aec-q100 qualified ? jedec (jesd22) qualified at 25 c ? lead (pb)-free and rohs-compliant msl-1 @ 260 c per jedec j-std-020 s kywork s g reen tm product s are compliant with all applicable legi s lation and are halogen-free. for additional information, refer to skyworks de?ition of green tm , document number s q04C0074. j2 v1 j1 j3 v2 s 1 6 14 figure 1. SKYA21001 block diagram description the SKYA21001 is a single-pole, double-throw (spdt) switch. the device features low insertion loss and positive voltage operation with very low dc power consumption. the SKYA21001 is manufactured in a compact 2.00 x 1.25 mm, 6-pin sc-70 package. a functional block diagram is shown in figure 1. the pin configuration and package are shown in figure 2. signal pin assignments and functional pin descriptions are provided in table 1. j3 gnd j2 v2 j1 v1 123 654 s2107 figure 2. SKYA21001 pinout C 6-pin sc-70 (top view)
data sheet ? SKYA21001: spdt switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 2 june 24, 2015 ? skyworks prop rietary information ? products and product information are subj ect to change without notice ? 202936e table 1. SKYA21001 signal descriptions pin name description pin name description 1 j3 rf output (note 1) 4 v1 dc control voltage 2 gnd ground 5 j1 rf output (note 1) 3 j2 rf output (note 1) 6 v2 dc control voltage note 1: a 100 pf blocking capacitor is required fo r >500 mhz operation. use larger value capacitors for lower frequency operation. table 2. SKYA21001 absolute maximum ratings (note 1) parameter symbol minimum maximum units control voltage v ctl C0.2 +8.0 v rf input power (v ctl = 0 to 7 v): >500 mhz <500 mhz +36 +27 dbm dbm operating temperature t op C40 +105 c storage temperature t stg C65 +150 c note 1: exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. caution : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this devi ce must be protected at all times from esd. static charges may eas ily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions should be used at all times.
data sheet ? SKYA21001: spdt switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202936e ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? jun e 24, 2015 3 table 3. SKYA21001 electrical specifications (note 1) (v ctl = 0 to 3 v, t op = +25 ? c, characteristic impedance = 50 , unless otherwise noted) parameter symbol test condition min typical max units insertion loss (note 2, note 3) i l 0.7 to 1.0 ghz, 25c 1.0 to 2.0 ghz, 25c 2.0 to 3.0 ghz, 25c 0.3 0.4 0.4 0.4 0.5 0.6 db db db insertion loss (etc) (note 4) i l 0.7 to 1.0 ghz, C40c to 105 c 1.0 to 2.0 ghz, C40c to 105 c 2.0 to 3.0 ghz, C40c to 105 c 0.35 0.41 0.46 0.45 0.55 0.7 db db db isolation (note 3) iso 0.7 to 1.0 ghz, 25c 1.0 to 2.0 ghz, 25c 2.0 to 3.0 ghz, 25c 22 22 20 25 25 23 db db db isolation (etc) (note 4) iso 0.7 to 1.0 ghz, C40c to 105 c 1.0 to 2.0 ghz, C40c to 105 c 2.0 to 3.0 ghz, C40c to 105 c 22 22 20 24 23.5 23 db db db voltage standing wave ratio vswr 0.7 to 1.0 ghz, 25c 1.0 to 2.0 ghz, 25c 2.0 to 3.0 ghz, 25c 1.2:1 1.2:1 1.3:1 1.4:1 1.4:1 1.45:1 voltage standing wave ratio (etc) (note 4) vswr 0.7 to 1.0 ghz, C40c to 105 c 1.0 to 2.0 ghz, C40c to 105 c 2.0 to 3.0 ghz, C40c to 105 c 1.2:1 1.2:1 1.3:1 1.4:1 1.4:1 1.45:1 switching characteristics: rise/fall on/off video feedthrough t sw t on 10/90% or 90/10% rf, 25c 50% control to 90/10% rf, 25c bandwidth = 500 mhz, 25c 90 125 25 180 250 ns ns mv switching characteristics (etc) (note 4): rise/fall (etc) on/off (etc) t sw t on 10/90% or 90/10% rf, C40c to 105 c 50% control to 90/10% rf, C40c to 105 c 90 150 180 250 ns ns 1 db input compression point ip1db 0.7 to 3.0 ghz: v ctl = 0 to 2 v, 25c v ctl = 0 to 3 v, 25c v ctl = 0 to 5 v, 25c +23 +28 +31 +25 +30 +34 dbm dbm dbm 1 db input compression point (etc) (note 4) ip1db 0.7 to 3.0 ghz: v ctl = 0 to 2 v, 25c v ctl = 0 to 3 v, 25c v ctl = 0 to 5 v, 25c +18 +23 +26 +20 +26 +30 dbm dbm dbm third order intercept point ip3 +5 dbm two-tone input power @ 0.7 to 3.0 ghz: v ctl = 0 to 2 v, 25c v ctl = 0 to 3 v, 25c v ctl = 0 to 5 v, 25c +36 +42 +44 +49 +52 +53 dbm dbm dbm third order intercept point (etc) (note 4) ip3 v ctl = 0 to 2 v, C40c to 105 c v ctl = 0 to 3 v, C40c to 105 c v ctl = 0 to 5 v, C40c to 105 c +35 +39 +41 +49 +50 +51 dbm dbm dbm control voltage: low (@ 20 a max) high (@100 a max) high (@ 200 a max) v ctl _ l v ctl _ h v ctl _ h 0 0.2 2.0 5.0 v v v note 1: performance is guaranteed only under the conditions listed in this table. note 2: insertion loss changes by 0.003 db/ c. note 3: insertion loss state. note 4: etc = extreme test conditions (v ctl = 0 to 5 v, t op = -40 c to +105 c).
data sheet ? SKYA21001: spdt switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 4 june 24, 2015 ? skyworks prop rietary information ? products and product information are subj ect to change without notice ? 202936e typical performance characteristics (v ctl = 0 to 3 v, t op = +25 ? c, pin = 0 dbm, characteristic impedance [zo] = 50 , c bl = 100 pf, unless otherwise noted) frequency (ghz) insertion loss (db) 0 0.2 0.4 0.6 0.8 1.0 0 0.5 1.0 1.5 2.0 2.5 3.0 figure 2. insertion loss vs frequency frequency (ghz) isolation (db) 10 15 20 25 30 35 40 45 50 0 0.5 1.0 1.5 2.0 2.5 3.0 figure 3. isolation vs frequency frequency (ghz) vswr 0 0.5 1.0 1.5 2.0 2.5 3.0 1.0 1.1 1.2 1.3 1.4 figure 4. vswr vs frequency table 4. truth table (v high = 2.0 to 5.0 v, v low = C0.2 to +0.2 v) (note 1) v1 v2 j1-j2 j1-j3 v high v low isolation insertion loss v low v high insertion loss isolation n ote 1 : any state other than described in this table places the device in an undefined state. an undefined state does not damage the device.
data sheet ? SKYA21001: spdt switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202936e ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? jun e 24, 2015 5 evaluation board description the SKYA21001 evaluation board is used to test the performance of the SKYA21001 spdt switch. an evaluation board schematic diagram is provided in figure 5. an assembly drawing for the evaluation board is shown in figure 6. package dimensions package dimensions for the 6-pin sc-70 are shown in figure 7, and tape and reel dimensions are provided in figure 8. package and handling information instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. the SKYA21001 is rated to moisture sensitivity level 1 (msl1) at 260 ? c. it can be used for lead or lead-free soldering. care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. production quantities of this product are shipped in a standard tape and reel format. 1 2 3 4 5 6 j3 j2 j1 rf output rf output rf output v2 v1 g nd s2108 c 3 c 2 c 1 d c c ontrol voltage d c c ontrol voltage note: use 100 pf blocking capacitors (c1, c2, c3) for >500 mhz operation. higher values recommended for lower frequency operation. exposed paddle must be grounded. use 10 nf blocking capacitors (c1, c2, c3) for <50 mhz operation. figure 5. SKYA21001 evaluation board schematic v2 j1 j2 c 2 r1 v1 c 1 r2 c 3 j3 r1 = r2 = 0 y1157 figure 6. SKYA21001 evaluation board assembly diagram
data sheet ? SKYA21001: spdt switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 6 june 24, 2015 ? skyworks prop rietary information ? products and product information are subj ect to change without notice ? 202936e 2.00 0.20 1.25 0.10 0.20 mm 0.10 2.20 0.20 0.90 0.10 0.005 0.005 0.95 0.15 0.25 0.15 0.14 0.04 0.65 mm bsc 0.23 ref pin 1 indicator y2125 notes: 1. all measurements are in millimeters. 2. dimensions and tolerances according to asme y14.5m-1994. figure 7. SKYA21001 6-pin sc-70 package dimensions notes: 1. carrier tape: black conductive polystyrene. 2. cover tape material: transparent conductive hsa. 3. cover tape size: 5.40 mm width. 4. ten sprocket hole pitch cumulative tolerance ?.20 mm. 5. all measurements are in millimeters. 2.25 0.10 (ao) 0.30 0.05 2.70 0.10 (bo) 8.00 +0.30/C0.10 4.00 (note 4) 4.00 0.10 3.50 0.05 2.00 0.05 1.75 0.10 a b 1.20 0.10 (ko) a b b a pin #1 ? 1.50+ 0.10/C0.00 ? 1.00 min. r0.30 typ. s1581 figure 8. SKYA21001 tape and reel dimensions
data sheet ? SKYA21001: spdt switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 202936e ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? jun e 24, 2015 7 ordering information model name manufacturing part number evaluation board part number SKYA21001: spdt switch SKYA21001 SKYA21001-evb copyright ? 2013-2015 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyw orks solutions, inc. (skyworks) products or services. these m aterials, including the information co ntained herein, are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentat ion, products, services, specific ations or product descriptions at any time, without notice. sk yworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, re production or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any ki nd, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, qualit y or non-infringement of any intellectual property right; all su ch warranties are hereby expressly disclaimed. skyworks does not warrant the accura cy or completeness of the information, text, graphics or other items contained within these ma terials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequentia l damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of mat erials has been advised of the possibility of such damage. skyworks products are no t intended for use in medical, lifesaving or life-su staining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyw orks customers using or selli ng skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products , which may deviate from published specifi cations as a result of design de fects, errors, or operation of products outside of published pa rameters or design specifications. customers sh ould include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product de sign, or damage to any equipment resulting from the use of skyw orks products outsid e of stated published specifications or parameters. skyworks and the skyworks symbol are trademarks or registered trad emarks of skyworks solutions, inc., in the united states and other countries. third-party brands and names are for identification purposes only, and are the pr operty of their respective owners. additi onal information, including relevant terms and conditions, posted at www.skyw orksinc.com, are incorporated by reference.
|
